Show All Category
Endotracheal Tube, Cuffed

Disposable Silicone Laryngeal Mask

GREATCARE brand Laryngeal Mask had won good reputation in the field of airway management, regional anaesthesia and pain management

The disposable silicone laryngeal mask is a medical device that is inserted into the patient's mouth in order to protect their airway. This type of mask is often used during surgery or other medical procedures where there is a risk of aspiration.

Description
  • Silicone smooth cuff provides good and soft sealing.
  • Designed for elective, outpatient surgical procedures.
  • Ideal for emergency and prehospital settings.
Ref. No.: Size: Applicable people Qty. Cs:
NMR104208 1.0 <5kg 10
NMR104209 1.5 5-10kg 10
NMR104210 2.0 10-20kg 10
NMR104211 2.5 20-30kg 10
NMR104212 3.0 30-50kg 10
NMR104213 4.0 50-70kg 10
NMR104214 5.0 >70kg 10

Disposable Silicone Laryngeal Mask

The disposable silicone laryngeal mask is a medical device that is inserted into the patient's mouth in order to protect their airway. This type of mask is often used during surgery or other medical procedures where there is a risk of aspiration.

What is a disposable silicone laryngeal mask?

A disposable silicone laryngeal mask is a type of medical device that is used to provide positive airway pressure to a patient who is not breathing on their own. The mask is inserted into the patient's mouth and then secured in place with straps or a headgear. A disposable silicone laryngeal mask can be used for a variety of procedures, including general anesthesia, cardiovascular surgery, and emergency medicine.

How is it used?

Laryngeal masks are most commonly used in surgical settings, but can also be used in emergency situations where intubation is necessary. The mask is inserted into the patient's mouth and then inflated with air, sealing off the larynx. This allows the patient to breathe without the need for a ventilator or other breathing assistance.

Advantages of disposable silicone laryngeal masks

The laryngeal mask is a type of mask that is inserted into the patient's mouth in order to protect their airway. This type of mask is advantageous because it is disposable and can be used on multiple patients. The silicone material of the laryngeal mask allows for a tight seal and prevents leakage. Additionally, the laryngeal mask does not need to be inflated, which makes it easy to insert and remove.

Disadvantages of disposable silicone laryngeal masks

While disposable silicone laryngeal masks have many advantages, there are also some disadvantages to consider. One of the biggest disadvantages is that they can be quite expensive. In addition, they can also be difficult to find in some areas. Another downside is that they can be uncomfortable for some people to wear. Finally, some people may experience allergic reactions to the silicone material.

Silicone Laryngeal Mask OVERVIEW
  • the intubating LMA (Fastrach™) is a specially designed supraglottic airway device (SAD) that can be used as a conduit to facilitate intubation
Disposable Silicone Laryngeal Mask USES
  • rescue device for failed intubation (i.e.. the “can’t intubate can ventilate” situation)
  • rescue devise for difficult bag-mask ventilation
  • a primary or alternate strategy for intubation
    • e.g. elective management of the known difficult airway
    • e.g. patients with known cervical spine injuries (ILMA use results in less spinal movement than direct laryngoscopy)
DESCRIPTION
  • a rigid curved airway tube
  • rigid handle for one-handed insertion in any patient position and helps ensure appropriate alignment
  • air-filled LMA cuff with epiglottic elevator bar
  • dedicated wire-reinforced silicone tracheal tube with low volume high-pressure cuff, ranging in sizes from 6.0 to 8.0 mm internal diameter
  • Stabilizing rod
  • Single-use and reusable models
  • Sizes 3 (30-50kg; 20mL cuff), 4 (50-70kg; 30 mL cuff) and 5 (70-100kg; 40 mL cuff)
METHOD OF INSERTION/ USE Insert ILMA
  • deflate ILMA cuff
  • lubricate ILMA mask on the posterior surface using water-soluble lubricant and rub the lubricant over the anterior hard palate
  • release cricoid pressure (if present) prior to inserting the LMA
  • insert ILMA holding the handle in a circular movement, maintaining contact against the curve of the palate and posterior pharynx
  • Never use the handle as a lever
  • release handle then inflate LMA cuff to a pressure of approximately 60 cm H2O (usually less than maximum cuff capacity)
Optimize position for intubation
  • Grasp the handle of the device and gently ventilate the patient
  • Squeezing the bag, and gently rotating the handle in and out and side to side until ventilation is optimized
  • Gently lift the handle anteriorly (in a similar fashion as a laryngoscope) and begin passing the lubricated ETT
Placement of an endotracheal tube
  • Hold the ILMA device handle while gently inserting the lubricated ETT into the airway shaft
  • Advance the ETT, inflate the cuff,OVERVIEW
    • the intubating LMA (Fastrach™) is a specially designed supraglottic airway device (SAD) that can be used as a conduit to facilitate intubation
    USES
    • rescue device for failed intubation (i.e.. the “can’t intubate can ventilate” situation)
    • rescue devise for difficult bag-mask ventilation
    • a primary or alternate strategy for intubation
      • e.g. elective management of the known difficult airway
      • e.g. patients with known cervical spine injuries (ILMA use results in less spinal movement than direct laryngoscopy)
    DESCRIPTION
    • a rigid curved airway tube
    • rigid handle for one-handed insertion in any patient position and helps ensure appropriate alignment
    • air-filled LMA cuff with epiglottic elevator bar
    • dedicated wire-reinforced silicone tracheal tube with low volume high-pressure cuff, ranging in sizes from 6.0 to 8.0 mm internal diameter
    • Stabilizing rod
    • Single-use and reusable models
    • Sizes 3 (30-50kg; 20mL cuff), 4 (50-70kg; 30 mL cuff) and 5 (70-100kg; 40 mL cuff)
    METHOD OF INSERTION/ USE Insert ILMA
    • deflate ILMA cuff
    • lubricate ILMA mask on the posterior surface using water-soluble lubricant and rub the lubricant over the anterior hard palate
    • release cricoid pressure (if present) prior to inserting the LMA
    • insert ILMA holding the handle in a circular movement, maintaining contact against the curve of the palate and posterior pharynx
    • Never use the handle as a lever
    • release handle then inflate LMA cuff to a pressure of approximately 60 cm H2O (usually less than maximum cuff capacity)
    Optimize position for intubation
    • Grasp the handle of the device and gently ventilate the patient
    • Squeezing the bag, and gently rotating the handle in and out and side to side until ventilation is optimized
    • Gently lift the handle anteriorly (in a similar fashion as a laryngoscope) and begin passing the lubricated ETT
    Placement of an endotracheal tube
    • Hold the ILMA device handle while gently inserting the lubricated ETT into the airway shaft
    • Advance the ETT, inflate the cuff and confirm intubation using ETCO2
    Removal of the ILMA, leaving the endotracheal tube in position
    • Remove the ETT connector and ease the ILMA out by gently swinging the handle caudally
    • Use the stabilizing rod to keep the ETT in place while removing the ILMA until the ETT can be grasped at the level of the incisors
    • Remove the stabilizing rod and gently unthread the inflation line and pilot balloon of the ETT
    • Replace the ETT connector
    • NB. ETT is often in too deep following insertion via an ILMA, ETT often needs to be pulled back (check the distance at the teeth and confirm on CXR)
    and confirm intubation using ETCO2
Removal of the ILMA, leaving the endotracheal tube in position
  • Remove the ETT connector and ease the ILMA out by gently swinging the handle caudally
  • Use the stabilizing rod to keep the ETT in place while removing the ILMA until the ETT can be grasped at the level of the incisors
  • Remove the stabilizing rod and gently unthread the inflation line and pilot balloon of the ETT
  • Replace the ETT connector
  • NB. ETT is often in too deep following insertion via an ILMA, ETT often needs to be pulled back (check the distance at the teeth and confirm on CXR)
, GREAT CARE brand Laryngeal Mask had won a good reputation in the field of airway management, regional anesthesia, and pain management, Silicone smooth cuff provides good and soft sealing, Designed for elective, outpatient surgical procedures, Ideal for emergency and prehospital settings. Visit the website for more details on Nexgen Medical. Disposable Silicone Laryngeal Mask, Laryngeal Mask, Disposable Laryngeal Mask Silicone, Reusable Silicone Laryngeal Mask, Reusable Silicone Laryngeal Mask at low price online, Reusable Silicone Laryngeal Mask Nexgen Medical, Reusable Silicone Laryngeal Mask price in the USA. OVERVIEW
  • the intubating LMA (Fastrach™) is a specially designed supraglottic airway device (SAD) that can be used as a conduit to facilitate intubation
USES
  • rescue device for failed intubation (i.e.. the “can’t intubate can ventilate” situation)
  • rescue devise for difficult bag-mask ventilation
  • a primary or alternate strategy for intubation
    • e.g. elective management of the known difficult airway
    • e.g. patients with known cervical spine injuries (ILMA use results in less spinal movement than direct laryngoscopy)
DESCRIPTION
  • a rigid curved airway tube
  • rigid handle for one-handed insertion in any patient position and helps ensure appropriate alignment
  • air-filled LMA cuff with epiglottic elevator bar
  • dedicated wire-reinforced silicone tracheal tube with low volume high-pressure cuff, ranging in sizes from 6.0 to 8.0 mm internal diameter
  • Stabilizing rod
  • Single-use and reusable models
  • Sizes 3 (30-50kg; 20mL cuff), 4 (50-70kg; 30 mL cuff) and 5 (70-100kg; 40 mL cuff)
METHOD OF INSERTION/ USE Insert ILMA
  • deflate ILMA cuff
  • lubricate ILMA mask on the posterior surface using water-soluble lubricant and rub the lubricant over the anterior hard palate
  • release cricoid pressure (if present) prior to inserting the LMA
  • insert ILMA holding the handle in a circular movement, maintaining contact against the curve of the palate and posterior pharynx
  • Never use the handle as a lever
  • release handle then inflate LMA cuff to a pressure of approximately 60 cm H2O (usually less than maximum cuff capacity)
Optimize position for intubation
  • Grasp the handle of the device and gently ventilate the patient
  • Squeezing the bag, and gently rotating the handle in and out and side to side until ventilation is optimized
  • Gently lift the handle anteriorly (in a similar fashion as a laryngoscope) and begin passing the lubricated ETT
Placement of an endotracheal tube
  • Hold the ILMA device handle while gently inserting the lubricated ETT into the airway shaft
  • Advance the ETT, inflate the cuff, and confirm intubation using ETCO2
Removal of the ILMA, leaving the endotracheal tube in position
  • Remove the ETT connector and ease the ILMA out by gently swinging the handle caudally
  • Use the stabilizing rod to keep the ETT in place while removing the ILMA until the ETT can be grasped at the level of the incisors
  • Remove the stabilizing rod and gently unthread the inflation line and pilot balloon of the ETT
  • Replace the ETT connector
  • NB. ETT is often in too deep following insertion via an ILMA, ETT often needs to be pulled back (check the distance at the teeth and confirm on CXR)