Show All Category
Endotracheal Tube, Cuffed

Extendable Circuit

Extendable Circuit Ref. No.: NMR103416

  • Extendable Circuit Ref. No.: NMR103416
Ref. No.: Type: Descriptions: Qty.Cs:
NMR103404 Anesthesia Circuit Length: 1.2m ID: 15.0mm OD: 22.0mm 30PCS 70 x 56 x 50cm
NMR103415 Breathing Circuit with two water traps Length: 1.8 ID:15.0mm OD:22.0mm 30PCS70 x 56 x 50cm
NMR103416 Extendable Circuit Length: 1.6m ID: 15.0mm OD: 22.0mm 50PCS 70 x 56 x 50cm
A extendable circuit is designed for powering needles by reducing installation time and removing the need to tap into your auto or truck’s being wiring. You can use your vehicle’s fuse box to painlessly connect 12 volt products by running the power wiring that comes with each hand directly through it. Several different performances are available that include a 4 amp fuse and 2 Expandable Circuit fuse spots. A outside of 4 needles can be used with each Expandable Circuit. Multiple circuits are also needed for connecting to each constant (un-switched), ignition ( switched) and headlight switched 12 volt sources. Nexgen Medical's extendable circuit allow you to fluently power 12 volt needles directly from the fuse panel of your auto or truck. Using this circuit eliminates the need to cut or splice into your vehicle’s plant wiring and make any endless variations. Expandable Circuits are offered in ATO (ATC), Mini, Low Profile Mini, Micro2 and Micro3 fuse sizes. Each circuit vessels with a 4 amp fuse that has 2 fuse spots featuring Plug and Play Connectivity for quick and flawless connections.

Extendable Circuit

Easier Installation with Nexgen Extendable Circuit

Using an extendable circuit will make powering needles much easier and exclude the lengthy process of having to cut and splice cables. All you'll need for installation is a line stripper and line crimper. Installation instructions are also handed to walk you through the process step by step. Before getting started, dissociate the negative side of your vehicle’s battery. Connect the ground line from your hand to a dependable ground source or bare essence position. Fit the super eminent power line into the open end of the blue butt connector on the red line attached to the Expandable Circuit. After the supereminent line is fitted into the butt connector, use a releasing tool to crimp the butt connector and secure the connection. Also detect your fuse panel and elect a fuse that doesn't exceed 15 amps to power your hand. This may be a constant (un-switched), an ignition ( switched) and/ or headlight switched 12 volt source, depending on the installation position you choose. Also make sure to choose anon-vital fuse source to power your hand. Next remove the fuse from the fuse panel where you have chosen to bridge power. Also plug the fuse you just removed into the open fuse socket of the Expandable Circuit. Replace the fuse you removed from your fuse panel by fitting the circuit in its place in the empty spot.