Show All Category
Endotracheal Tube, Cuffed

Test Tube (PP)

Test Tube (PP)

Description
Ref. No.: Description: Spec.: Qty Cs. :
NML703-1 Test Tube (PP) 12 x 75 5000
NML703-2 Test Tube (PP) 13 x 78 4000
NML703-3 Test Tube (PP) 12 x 100 3000
NML703-4 Test Tube (PP) 15 x 100 2250
Test Tube intended for general chemical work are usually made of glass, for their relative resistance to heat. it made from expansion-resistant glasses, mostly silicate glass or fused quartz, can withstand high temperatures up to several hundred degrees Celsius.

Test Tube

Chemistry tubes are available in a multitude of lengths and widths, typically from 10 to 20 mm wide and 50 to 200 mm long. The top often features a flared lip to aid pouring out the contents. A chemistry test tube typically has a flat bottom, a round bottom, or a conical bottom. Some test tubes are made to accept a ground glass stopper or a screw cap. They are often provided with a small ground glass or white glaze area near the top for labeling with a pencil. Test tubes are widely used by chemists to handle chemicals, especially for qualitative experiments and assays. Their spherical bottom and vertical sides reduce mass loss when pouring, make them easier to wash out, and allow convenient monitoring of the contents. The long, narrow neck of test tube slows down the spreading of gases to the environment. Test tubes are convenient containers for heating small amounts of liquids or solids with a Bunsen burner or alcohol burner. The tube is usually held by its neck with a clamp or tongs. By tilting the tube, the bottom can be heated to hundreds of degrees in the flame, while the neck remains relatively cool, possibly allowing vapors to condense on its walls. A boiling tube is a large test tube intended specifically for boiling liquids. Test Tube (PP) A test tube filled with water and upturned into a water-filled beaker is often used to capture gases, e.g. in electrolysis demonstrations. A Test Tube with a stopper is often used for temporary storage of chemical or biological samples. Culture tubes are test tubes used in biology and related sciences for handling and culturing all kinds of live organisms, such as molds, bacteria, seedlings, plant cuttings, etc.. Some racks for culture tubes are designed to hold the tubes in a nearly horizontal position, so as to maximize the surface of the culture medium inside. Culture tubes for biology are usually made of clear plastic (such as polystyrene or polypropylene) by injection molding and are often discarded after use. Plastic test tubes with a screw-top cap are often called "Falcon tubes" after a line manufactured by Beeton Dickinson. Some sources consider that the presence of a lip is what distinguishes a test tube from a culture tube.